noisy inverter RF
-
bagmaker
- Posts: 886
- Joined: Sun Jan 20, 2013 4:56 pm
- Location: Victoria
-
BruceS
- Site Admin
- Posts: 9304
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
Re: noisy inverter RF
If it's 'approved' for use in Australia it shouldn't create RFI but we all know ..............
https://www.solarquotes.com.au/blog/wha ... erference/
https://www.solarquotes.com.au/blog/wha ... erference/
*******************
BruceS
Mannum, SA
********************
BruceS
Mannum, SA
********************
-
bagmaker
- Posts: 886
- Joined: Sun Jan 20, 2013 4:56 pm
- Location: Victoria
-
TassyJim
- Posts: 97
- Joined: Wed Dec 05, 2012 7:18 am
- Location: Stowport NW Tassy
Re: noisy inverter RF
AM radio will be difficult.
Try a few clip on ferrite suppressors on all the power leads.
They are needed on ALL leads as close as possible to the inverter.
Jaycar LF1290 or similar.
(They are cheaper from ebay.)
Jim
Try a few clip on ferrite suppressors on all the power leads.
They are needed on ALL leads as close as possible to the inverter.
Jaycar LF1290 or similar.
(They are cheaper from ebay.)
Jim
Jim & Jennene with Teddy & Pascale. RIP Scarlet
Used to have Iveco towing a 5th Wheeler
Now back to dreaming again...
Nomad's Almanac
http://www.c-com.com.au/nomad.htm
Used to have Iveco towing a 5th Wheeler
Now back to dreaming again...
Nomad's Almanac
http://www.c-com.com.au/nomad.htm