.........Peter.Wanted ,ball saver Torque Multiplier
-
2foot6
-
T1 Terry
- Posts: 15963
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 50 times
- Been thanked: 30 times
Re: Wanted ,ball saver Torque Multiplier
Put the other links in, can you try them and see if they work please
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
BruceS
- Site Admin
- Posts: 9304
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
-
Vik351
- Posts: 1230
- Joined: Sat Aug 05, 2017 3:50 pm
- Location: Adelaide SA
Re: Wanted ,ball saver Torque Multiplier
https://www.ebay.com.au/itm/1-64-Torque ... SwVZBdZ0qi
Should I buy 3, cheepa price
Any one else need one...???
vik...
Should I buy 3, cheepa price
Any one else need one...???
vik...
Merk 4x4 VF30 519 CDI 2020 LWB V6TD 3 ltr 6 wheeler ,Tenorite Grey ... yep, it's not white ...!!! 
-
Greynomad
- Posts: 9025
- Joined: Tue Dec 04, 2012 4:16 pm
- Location: Rutherglen, Vic.
- Has thanked: 28 times
- Been thanked: 61 times
Re: Wanted ,ball saver Torque Multiplier
Vik,
Buy six. Become a wholesaler!
Loved the 'Chinglish' on the first link!
1. "Set of friends to set to discharge the screws fixed above the set of the screws to the diagonal wrench."
2. "Anti-clockwise turn the crank, start each screw is loose."
3. "Manual twist the screw loose."
A: They don't know the diff between a screw and a nut.
B: What on earth does No 1 even mean?
Buy six. Become a wholesaler!
Loved the 'Chinglish' on the first link!
1. "Set of friends to set to discharge the screws fixed above the set of the screws to the diagonal wrench."
2. "Anti-clockwise turn the crank, start each screw is loose."
3. "Manual twist the screw loose."
A: They don't know the diff between a screw and a nut.
B: What on earth does No 1 even mean?
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
-
Vik351
- Posts: 1230
- Joined: Sat Aug 05, 2017 3:50 pm
- Location: Adelaide SA
Re: Wanted ,ball saver Torque Multiplier
So no takers...???
Well I will buy one then 1" drive and 27 mm socket in the kit , sorry 2foot6, save myself a slab a pi55 for all the free loaders that come over...!!!
vik...
Well I will buy one then 1" drive and 27 mm socket in the kit , sorry 2foot6, save myself a slab a pi55
for all the free loaders that come over...!!! vik...
Merk 4x4 VF30 519 CDI 2020 LWB V6TD 3 ltr 6 wheeler ,Tenorite Grey ... yep, it's not white ...!!!
-
supersparky
- Posts: 8784
- Joined: Mon Nov 26, 2012 7:00 pm
- Location: Home on the beautiful Gold Coast for a while.
- Has thanked: 81 times
- Been thanked: 66 times
Re: Wanted ,ball saver Torque Multiplier
I have the top one of those that T1 lists. Works great, much better than dropping the bus on Bruces' hand again.
Fortunately haven't had to use it on the roadside yet. But have done the odd practice in the driveway. HINT: Make sure that your jack will still fit under the vehicle if the tyre is flat, or have enough blocks to drive up onto to get it high enough to fit a fully inflated wheel.
We did have that problem once, way back when we were newbies.
Fortunately haven't had to use it on the roadside yet. But have done the odd practice in the driveway. HINT: Make sure that your jack will still fit under the vehicle if the tyre is flat, or have enough blocks to drive up onto to get it high enough to fit a fully inflated wheel.
We did have that problem once, way back when we were newbies.
Cheers
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
-
Vik351
- Posts: 1230
- Joined: Sat Aug 05, 2017 3:50 pm
- Location: Adelaide SA
Re: Wanted ,ball saver Torque Multiplier
Yep supersparky... bin there done that with a Viscount Aerolite ...
Pulled over to the side of the dirtrack we were on, jack no fit under...
So I dug a hole for it and got outa strife that way...
Had a look at the standard Iveco jack and it looks pretty low (Bottle job) but like ya say will look into it a bit better as if I had a flat
vik...
the brackets I want off
Pulled over to the side of the dirtrack we were on, jack no fit under...
So I dug a hole for it and got outa strife that way...
Had a look at the standard Iveco jack and it looks pretty low (Bottle job) but like ya say will look into it a bit better as if I had a flat
vik...
the brackets I want off
Merk 4x4 VF30 519 CDI 2020 LWB V6TD 3 ltr 6 wheeler ,Tenorite Grey ... yep, it's not white ...!!!
-
Greynomad
- Posts: 9025
- Joined: Tue Dec 04, 2012 4:16 pm
- Location: Rutherglen, Vic.
- Has thanked: 28 times
- Been thanked: 61 times
Re: Wanted ,ball saver Torque Multiplier
Have you considered an angle grinder? 
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
-
2foot6
Re: Wanted ,ball saver Torque Multiplier
What's the issue with the brackets? Vik.......Asking because I haven't seen them before, I guess Fiats don't need them. 
.............Peter.
I guess Fiats don't need them. .............Peter.