Page 2 of 11
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 6:55 am
by jon_d
Now Bernie, have I mentioned that you should replace the u bolts?
Spring joints make them. Carrolls made mine for about $25 each from memory with nuts and washers etc.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 9:05 am
by BernieQ2
Was that tongue in cheek Jon ?
Bernie.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 11:31 am
by jon_d
Nup. All serouz.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 12:16 pm
by BernieQ2
You musta missed the bit were I sed I CUT the U bolts off.
Who said it wouldn't come off
IMG20230501113811.jpg
.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 1:17 pm
by Keith Morris
AND NOW ----
You have to get it back together again-----loo0k mat what you have to look forward to.
You don't have to watch the "wheelie bin truck" for entertainment.
Are you having fun.
Keith.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 1:18 pm
by Shirley
Congratulations, slow & steady wins the race, knew you could do it, you can sit down & have a couple of beers
now, think you’ve earned them.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 2:30 pm
by Newcastle George
No beers until he has removed the u bolts, on both sides of the MH.
George
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 3:36 pm
by Shirley
Think that’s a little tough George, the other side without a broken spring might be easier to remove?
Travel safely George & enjoy your Aussie getaway, you’ve been spoilt with getaways this year.
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 4:40 pm
by BernieQ2
Its not all beer and skittles....I still have the remnants of the U bolts.
They still don't want to move.
Bernie.
IMG_0292.JPG
Re: Bernie's u-bolt saga.
Posted: Mon May 01, 2023 4:55 pm
by Newcastle George
I thought that may have been the case Bernie.
George
