Page 115 of 123

Re: Bernie and Carols Isuzu fit out.

Posted: Sat Aug 12, 2017 9:13 am
by jon_d
https://www.aliexpress.com/item/6BD1-6B ... 61235.html


they are about.

ebay and ali. range from $120 to $250

Re: Bernie and Carols Isuzu fit out.

Posted: Sat Aug 12, 2017 9:24 am
by BernieQ2
Thanks Jon I have been onto old mate in China that sent the compressor $25 USD waiting for shipping cost .
AND photos to show correct item . ( a must )
Bernie .
Bruce more than one hole .

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Aug 14, 2017 6:53 pm
by supersparky
Bernie, Have you thought about using Devcon. Years ago we used it to hold the bottom bearing in Landrover gearboxes after they had failed and spun in the housing.
I still owe you a call, but I am slack.

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Aug 14, 2017 7:58 pm
by BernieQ2
No David not worth the agro , you have to remove most of the engine to get it off...not something I'm prepared to do on the side of the road out bush .
So piece of mind says put a new cover on .
I have time on my side at home even with a crook knee bad back and animal extraction duties .
Bernie .
Better check my phone works ?

Re: Bernie and Carols Isuzu fit out.

Posted: Tue Aug 15, 2017 8:14 pm
by supersparky
Bernie, More info on animal extraction duties please.

Re: Bernie and Carols Isuzu fit out.

Posted: Tue Aug 15, 2017 8:23 pm
by BernieQ2
Read the good morning thread Dave.
Bernie

Re: Bernie and Carols Isuzu fit out.

Posted: Fri Aug 18, 2017 1:17 pm
by BernieQ2
Just a update on my oil cooler cover . I had a quote in Aus , for $300 + gst.
Another from Taiwan for $69 Aus delivered slow boat .
Another from China for $118 Aus delivered Air mail .
I went for the $118 should be here next week ?
Another thing while at the truck place in Maryborough they kept telling me that the timing cover doesn't have a gasket ?
Change of mind when I showed them the gasket clearly shown in the work shop manual which I had with me .
I also ordered all the gaskets from Maryborough they should be at my place some time next week , Cost for gaskets $147 .

Bernie .

Re: Bernie and Carols Isuzu fit out.

Posted: Fri Aug 18, 2017 6:41 pm
by jon_d
I sent the photo with the part numbers and picture of the gasket.

Pretty good with the oil cooler price!

Re: Bernie and Carols Isuzu fit out.

Posted: Wed Aug 23, 2017 11:34 am
by BernieQ2
Morning all a small update I have received my oil cooler cover from . SHENZHEN GATEWAY, China ordered on Friday evening .
I ordered the gaskets on Thursday they still haven't arrived , guess its a bit much hoping seeing they have to come all the way from Brisbane ??
The old and the new side by side .
Bernie .

Further update the gaskets have arrived via Assie post snail mail .

DSCF2815 (Custom).JPG

Re: Bernie and Carols Isuzu fit out.

Posted: Wed Aug 23, 2017 12:18 pm
by Busman
Sometimes all the planets align eh Bernie?
We recently had some stuff that was picked up on Saturday morning in China and delivered to us before lunch on Monday. Even the TNT guy would not believe until I showed him the tracking.