Page 119 of 123

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 10:10 am
by BernieQ2
The motor goes . Wacko.
Bernie .

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 10:30 am
by BruceS
Good stuff Bernie!! Gives you a good feeling when things turn out good doesn't it?
Did you save the old coolant or put new in?
Time for beerOclock now?

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 10:38 am
by Newcastle George
BernieQ wrote: Sun Sep 10, 2017 10:10 am The motor goes . Wacko.
Bernie .
But, is the compressor working and do you have any air leaks?

George

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 10:43 am
by BernieQ2
None in as yet Bruce but have new to put in . I don't have the radiator in neither , cant get the spanner on the crank nut with radiator in its to close .
Probly be all back together by Wednesday ........maybe.....got to see what parts I have left over hehehehe.
Finished for today gunna go see a mate and deliver some tomatoes to him and her, ( we have a huge surplus ) its only payback we get veg off them and we do in reverse .
Bernie .
George the compressor is working for the short time I had it running it built up air , wont know of air leaks till its all going properly .

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 8:41 pm
by supersparky
Well done Bernie, you must be a happy chappy now :D :D :D

Re: Bernie and Carols Isuzu fit out.

Posted: Sun Sep 10, 2017 8:51 pm
by jon_d
Well done Bernie.

jd

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Sep 11, 2017 4:56 pm
by BernieQ2
Thanks David and Jon for your support . Especially Jon for the help with the work shop manual and the phone calls .
Been putting all the little bits back today brackets and stuff . another thing before I forget the engine cut off is not working I think maybe a kink in the cable ? The solenoid is working tho .
Then around 2pm I decided to put the radiator under the bus ready for tomorrow...well this became that and before I new I was jacking the radiator into position . Its still a pofteenth from being in correctly , but I called time and will resume tomorrow . NOW don't show health and safety the pics....but a man's gotta do !! slowly, slowly brick at a time the wood platform is bolted to the jack .

Bernie .
DSCF2873 (Custom).JPG
DSCF2874 (Custom).JPG
DSCF2875 (Custom).JPG

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Sep 11, 2017 5:06 pm
by Newcastle George
The falling bricks will cause more pain than the radiator.

George

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Sep 11, 2017 9:14 pm
by GoinBush
Bernie, well done!!
You are a man after my own Jock's heart. Zaccary the sort of thing that happens around here. He put four grader wheels on on his own the other day (much to the relief of the young stationhands who were meant to help him) and yesterday we used a jack with a three foot bit of steel to jack up a portable loading ramp to put it's legs on. His endless chain is his best friend and I guess you don't get to his age without learning how to do things smarter, not harder.
Glad your bus is coming along.

Re: Bernie and Carols Isuzu fit out.

Posted: Mon Sep 11, 2017 9:28 pm
by jon_d
You're welcome Bernie.

:-)

jd