Water Pump

This category is for discussing a wide range of topics including hot water, cold water, heaters, black & grey holding tanks etc.
Kelvin12
Posts: 889
Joined: Wed Nov 28, 2012 4:42 pm
Location: Urunga NSW 2455

Re: Water Pump

Post by Kelvin12 »

Morning Peter,

Thanks, saved that diagram for future reference, it didn't come with the pump so must be an update or something.

Morning Boss,

According to printed sheet that came with the pump it says its 4XX9 series. On the pump itself it has a model number 4009-131-A54. 3gpm 11.3lpm
Shut off pressure 30psi 2.06bar

Bloody confusing with their part numbers. Others are OK, know what they are.

Dirk
User avatar
T1 Terry
Posts: 15963
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Water Pump

Post by T1 Terry »

Came across this update PDF last night as well, they have changed the N/S to Not Shown. The last diagram shows the wiring http://www.shurflo.com/files/RV-Product ... 5_E65_.pdf is this the same as the 4009 series?
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
oldtrack123
Posts: 192
Joined: Mon Dec 03, 2012 9:11 pm

Re: Water Pump

Post by oldtrack123 »

T1 Terry wrote:Came across this update PDF last night as well, they have changed the N/S to Not Shown. The last diagram shows the wiring http://www.shurflo.com/files/RV-Product ... 5_E65_.pdf is this the same as the 4009 series?
Hi Terry
I may be wrong but I believe the only difference is the pressure setting
& by pass valves
55psi for 4008
45psi for4009

Both are the same nominal flow rates 10l p m

PeterQ
Kelvin12
Posts: 889
Joined: Wed Nov 28, 2012 4:42 pm
Location: Urunga NSW 2455

Re: Water Pump

Post by Kelvin12 »

Peter,

Every 12v pump I look at all were rated at the higher pressure of 55psi.

Dirk

Return to “Plumbing, Hotwater & Heaters”