Hi Folks our journey has come full circle we are HOME , don't look for me at Bedford Weir Bob we aint there sorry would have been good to catch up .
Bernie and Carols Isuzu fit out.
Re: Bernie and Carols Isuzu fit out.
You do not have the required permissions to view the files attached to this post.
-
BruceS
- Site Admin
- Posts: 9307
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
Re: Bernie and Carols Isuzu fit out.
Congratulations on a successful mini lap around the paddock Bernie & Carol!!
Now you can upload all your photos into your album for everyone to see?
I'll give you two days before you wish you could be off again!
Now you can upload all your photos into your album for everyone to see?
I'll give you two days before you wish you could be off again!
*******************
BruceS
Mannum, SA
********************
BruceS
Mannum, SA
********************
Re: Bernie and Carols Isuzu fit out.
Just a cuppla numbers for you . Total kilometres 9392 and a average of 4.320 Ks to the litre. plus the car done all that plus 3 tanks of fuel .
I didn't think to keep a tab on the Suzi ks .
A few pics, the fish was caught in the Burdekin river yum its a Sooty for those that don't know, a cuppla geese (the eggs are great) belong to my Niece in Townsville and what you see in the bush when you weren't even looking a Camel .(whole heard actually)
I didn't think to keep a tab on the Suzi ks .
A few pics, the fish was caught in the Burdekin river yum its a Sooty for those that don't know, a cuppla geese (the eggs are great) belong to my Niece in Townsville and what you see in the bush when you weren't even looking a Camel .(whole heard actually)
You do not have the required permissions to view the files attached to this post.
-
bob r
- Posts: 3946
- Joined: Sun Dec 09, 2012 9:24 am
- Location: central west nsw Tiaro QLD for winter
- Has thanked: 3 times
- Been thanked: 4 times
Re: Bernie and Carols Isuzu fit out.
Hey Bernie did you get to have a look at Bedford weir? If so what did you think.
Bob
Bob
-
Dot
- Posts: 24727
- Joined: Fri Nov 23, 2012 6:12 pm
- Location: Strathalbyn SA
- Been thanked: 37 times
Re: Bernie and Carols Isuzu fit out.
When are you off again Bernie?
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
Re: Bernie and Carols Isuzu fit out.
Ok time for a update . I had a machinery done on the 9th of this month , passed ok just had one of the over head clearance light out .
I have a 200k round trip to have this annual done cost $110 . Parked the bus at home has and been sitting there since .
Now for those who don't know I'm/we are putting down 14 Sq. metres of pavers between the house and the car shed . I have 5.5 tonne of crusher dust as the base covering , have about half done so far . Now while having a break (no Bruce no beer) I noticed a shinny bit under the rear passenger side inner wheel . On closer inspection I had done a brake seal BUGGA . So who wants to help with this one ? as yet I haven't removed the wheels to have a closer look . I'm just glad this didn't happen while on the road in a isolated area . It will probably be my fault as I haven't adjusted the brakes , I'm guessing here but I think that I have pushed a cup off ? time will tell .
To busy as yet to remove the wheels so when I do all will be told .
My brakes are air over hydraulic for the technical amongst us .
Bernie .
I have a 200k round trip to have this annual done cost $110 . Parked the bus at home has and been sitting there since .
Now for those who don't know I'm/we are putting down 14 Sq. metres of pavers between the house and the car shed . I have 5.5 tonne of crusher dust as the base covering , have about half done so far . Now while having a break (no Bruce no beer) I noticed a shinny bit under the rear passenger side inner wheel . On closer inspection I had done a brake seal BUGGA . So who wants to help with this one ? as yet I haven't removed the wheels to have a closer look . I'm just glad this didn't happen while on the road in a isolated area . It will probably be my fault as I haven't adjusted the brakes , I'm guessing here but I think that I have pushed a cup off ? time will tell .
To busy as yet to remove the wheels so when I do all will be told .
My brakes are air over hydraulic for the technical amongst us .
Bernie .
-
Busman
- Posts: 1261
- Joined: Wed Dec 05, 2012 10:09 pm
- Location: Stanthorpe QLD
- Has thanked: 1 time
- Been thanked: 2 times
Re: Bernie and Carols Isuzu fit out.
You must be under 16 tonnes so get it done private ?
We are over that so have to go over the pits and they charged 172 for that just a few months ago
got 3 of the changes on the 27 long list done so far, seems other things get thought of and keep getting added.
William
We are over that so have to go over the pits and they charged 172 for that just a few months ago
got 3 of the changes on the 27 long list done so far, seems other things get thought of and keep getting added.
William
Vanishing Point, almost ready to vanish
Suzuki GV more than ready to go NOW !
Suzuki GV more than ready to go NOW !
Re: Bernie and Carols Isuzu fit out.
Different rules in Qld William he is a certified heavy machinery inspector I'm around 10 tonne .
Bernie .
Bernie .