Upgrade needed

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Upgrade needed

Post by Mrcoolabah1au »

At the moment we seem to have a leaky problem some were on the roof I’m assuming was book in for the caravan repair man but the bloody Chinese wog got in the road
So do we take them all off and try and find a needle in a hay stack put a new system up ☔️☔️☔️
Coolabah1au
Wayne nini
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: Upgrade needed

Post by Dot »

Wrong time of the year for that guys. :(
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Upgrade needed

Post by Mrcoolabah1au »

Ok come back in six months maybe 🤔
Coolabah1au
Wayne nini
User avatar
T1 Terry
Posts: 15963
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Upgrade needed

Post by T1 Terry »

Mrcoolabah1au wrote: Thu Apr 09, 2020 1:25 pm At the moment we seem to have a leaky problem some were on the roof I’m assuming was book in for the caravan repair man but the bloody Chinese wog got in the road
So do we take them all off and try and find a needle in a hay stack put a new system up ☔️☔️☔️
Tie a tarp over it for the moment to stop more water coming in. Within a mth or two things might settle down a bit and you can organise something then, but if you don't stop the water coming in now you will have such a serious problem it might be beyond repair. In the mean time, the rust might eat its way to the surface and make it easier to fine when you are ready to get the job done.
With my big bus project, when I pealed the first sheet off the roof there were rust holes where the next sheet overlapped, same with the next sheet and so on, the whole roof was stuffed simply because they had overlapped the roof sheets but used no sealer at the joints ..... big job including all the windows out because the roof sheets were riveted on under the window frames

T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Upgrade needed

Post by Mrcoolabah1au »

Thank you mate have gone to the trouble of making the hole bus level 🚌 on our block was sloping to the left on the passenger side that was the worse one think I’m lucky in a way our roof is fibre glass there is a second on starting to appear now maybe runoff but up near the front above the drivers side corner 🤔
Coolabah1au
Wayne nini

Return to “Low Voltage Electrical”