Back on topic
Some progress photos of the trailer
This is the yet to be molested side showing the position of the front railing and sort of shows how the front of the guard is welded to the frame
Trailer rebiuld 1.jpg
This is showing how the guard was mounted on the non molested side
Trailer rebuild 5.jpg
This is what happens when trying to add a piece so the guard can be welded outside the rail ..... tricky with flux core mig wire because each weld adds slag and must be removed or the weld will have slag inclusions .... as you can see in the vertical up weld, I hadn't quite mastered it at that point
Trailer hole filling.jpg
Not too bad eh .... now to either fix of hide the not so good welds
Trailer hole filled.jpg
This is the molested side with the front railing removed and the guard cut away from the trailer frame
Trailer rebiuld 2.jpg
This is to show where the front wheel retaining well will be positioned using parts cut off, this will go over the tilt locking pin two pieces welded to the frame for the inner leg and the outer leg over the rusty spot where the leg was cut off .... it extends forward till in would be touching the cage .... but that will be removed ....
Trailer rebuild 3.jpg
This is looking up the molested side to show where the guard will be mounted on the outside face of the trailer frame
Trailer rebuild 4.jpg
T1 Terry
You do not have the required permissions to view the files attached to this post.