Good morning daily
-
BruceS
- Site Admin
- Posts: 9446
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 67 times
- Been thanked: 53 times
Re: Good morning daily
Did you try a heatgun or hair dryer?
Sometimes it'll loosen it slightly to get a fish filleting knife under it.
Sometimes it'll loosen it slightly to get a fish filleting knife under it.
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************
Re: Good morning daily
Success... it's of... just the fabric thingy ... only took profanities to move it 
...nar I lie... not about the swearing 
... that bit's true... didn't need the hair dryer Bruce...I don't have enough..I started from the wrong end of cause... normal... but the platform I used was at the front...I could grab the fabric and move it... just..
And I moved the platform along as I went.. till near the end... and for the last yard or so it wouldn't move...cranky time
..so I was going along slowly trying to find why it wouldn't move...
I found a screw under the material
Why one was put there is anyone's guess...so it had three screws...I'm hoping I don't have to remove the track.??
Bernie
...nar I lie... not about the swearing 
... that bit's true... didn't need the hair dryer Bruce...I don't have enough..I started from the wrong end of cause... normal... but the platform I used was at the front...I could grab the fabric and move it... just..And I moved the platform along as I went.. till near the end... and for the last yard or so it wouldn't move...cranky time
..so I was going along slowly trying to find why it wouldn't move...
I found a screw under the material Why one was put there is anyone's guess...so it had three screws...I'm hoping I don't have to remove the track.??
Bernie
You do not have the required permissions to view the files attached to this post.
-
BruceS
- Site Admin
- Posts: 9446
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 67 times
- Been thanked: 53 times
Re: Good morning daily
Bernie you can buy the stuff to sew on the top that has the two sizes.
Might be easier to get that sewing machine out then to remove the track. Hope you have plenty of roof'n'gutter?
Might be easier to get that sewing machine out then to remove the track. Hope you have plenty of roof'n'gutter?
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************
-
jon_d
- Posts: 4963
- Joined: Thu Apr 11, 2013 6:37 pm
- Location: bedford
- Has thanked: 48 times
- Been thanked: 63 times
Re: Good morning daily
The screw holds the material in place. It has to be exactly square to the roller. If not, the material cork screws up when it rolls as it closes.
-
T1 Terry
- Posts: 16636
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 78 times
- Been thanked: 60 times
Re: Good morning daily
Morning Dave and Terrie, welcome home.
Bernie, the gap in the sail track is much bigger than the gap in the sail track that comes with the new awning .... it won't stay on that track, just like it wouldn't stay in the track on the Winne, and a threaded heavy rope through the new awning material, not the small diameter core stuff they supply ..... the awning was coming out as I was feeding it in using the supplied stuff.
Your sail track looks much easier to remove than the stuff on the Winnie .... I'll have to mount the replacement sail track under the existing one .....
I want to buy more of those Aldi scaffolds you have there, a platform on the top rung and a second where you have your platform mounted, and they become very stable, I made ladders out of the extra end pieces .... I wonder if Aldi will ever have them on "special buys" again
T1 Terry
Bernie, the gap in the sail track is much bigger than the gap in the sail track that comes with the new awning .... it won't stay on that track, just like it wouldn't stay in the track on the Winne, and a threaded heavy rope through the new awning material, not the small diameter core stuff they supply ..... the awning was coming out as I was feeding it in using the supplied stuff.
Your sail track looks much easier to remove than the stuff on the Winnie .... I'll have to mount the replacement sail track under the existing one .....
I want to buy more of those Aldi scaffolds you have there, a platform on the top rung and a second where you have your platform mounted, and they become very stable, I made ladders out of the extra end pieces .... I wonder if Aldi will ever have them on "special buys" again T1 Terry
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
BruceS
- Site Admin
- Posts: 9446
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Nebo, Qld
- Has thanked: 67 times
- Been thanked: 53 times
Re: Good morning daily
https://www.ebay.com.au/itm/16530485856 ... R6C6gdLQZg
Wait till you get to see what size the top is but this is just the tape that can be sewn on a tarp that suits both main sizes. I think 5 &7mm?
Wait till you get to see what size the top is but this is just the tape that can be sewn on a tarp that suits both main sizes. I think 5 &7mm?
*******************
BruceS
Nebo, Qld
********************
BruceS
Nebo, Qld
********************