I am going GREEN. I have bought a 52 litre tank to use as a very water tank. I will have tipo attached inlets and outlets. Has any one had any success in attached inlet/outlets to plastic tanks.
Peter
Greg water tank
-
bellett65
- Posts: 228
- Joined: Thu Dec 13, 2012 6:53 am
- Location: Cranbourne Victoria
Greg water tank
Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
-
T1 Terry
- Posts: 15963
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 50 times
- Been thanked: 30 times
Re: Greg water tank
Let me guess, this was sent from one of those annoying predictive text things 
a Greg water tank wouldn't be any use fr a peter or a Rainie eh
Plastic welding is an art form, the material added must be the same as the material the tank is made from, different plastics can not be welded together.
There was a product the panel beating industry had for repairing plastic bumpers and other plastic body parts. It used a primer spray to make all the surfaces compatible with the glue, the glue was in a 2 pack twin plunger unit with a special mixing tube. I attended a demo night for this product and it seemed to create a very strong join, but it wasn't cheap. I think this was the stuff http://www.lord.com/products-and-soluti ... ct.xml/298
The other alternative is Q Bond, no idea how long it remains strong though. A lot of people swear by it for quick repairs etc but I'm not too sure how it would go for the job you need to do. Possibly if you "V" out the joint so a heavy build up of material can be applied would do the job.
a Greg water tank wouldn't be any use fr a peter or a Rainie eh Plastic welding is an art form, the material added must be the same as the material the tank is made from, different plastics can not be welded together.
There was a product the panel beating industry had for repairing plastic bumpers and other plastic body parts. It used a primer spray to make all the surfaces compatible with the glue, the glue was in a 2 pack twin plunger unit with a special mixing tube. I attended a demo night for this product and it seemed to create a very strong join, but it wasn't cheap. I think this was the stuff http://www.lord.com/products-and-soluti ... ct.xml/298
The other alternative is Q Bond, no idea how long it remains strong though. A lot of people swear by it for quick repairs etc but I'm not too sure how it would go for the job you need to do. Possibly if you "V" out the joint so a heavy build up of material can be applied would do the job.
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
BruceS
- Site Admin
- Posts: 9304
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
Re: Greg water tank
Plastic or Poly? I think most are made of poly now. Most manufacturers have a choice of inlet/outlets than can be attached.
*******************
BruceS
Mannum, SA
********************
BruceS
Mannum, SA
********************
-
Greynomad
- Posts: 9025
- Joined: Tue Dec 04, 2012 4:16 pm
- Location: Rutherglen, Vic.
- Has thanked: 28 times
- Been thanked: 61 times
Re: Greg water tank
I used brass fittings and soft nylon washers when fitting irrigation taps to a tank at last house...
Worked for me.
Worked for me.
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
-
bellett65
- Posts: 228
- Joined: Thu Dec 13, 2012 6:53 am
- Location: Cranbourne Victoria
Re: Greg water tank
Well an update, still got the 52 litre tank in workshop. I ended up fitting a 135 litre tank. I replaced all the 25mm pvc pies and fittings with 40mm. It has 2 HepVo valves in the system those pipes go to the bottom of the tank and the shower to the top, The drain hose has been replaced with 40mm marine sullage hose.It has a smooth bore The sinks and shower now empty really fast. The tank when full will empty in about 40 seconds
You do not have the required permissions to view the files attached to this post.
Political Correctness is a doctrine, fostered by a delusional, illogical minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.
-
T1 Terry
- Posts: 15963
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 50 times
- Been thanked: 30 times
Re: Greg water tank
Neat job Peter..... the Mazda needs someone to fit up its grey water tank..... are you busy?
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves