I agree with all the above, just ask RusselB.generdawg wrote:Ala the McInroe factor.T1 Terry wrote:...the keyboard punch ups that get the crowds in.
Geoff
I agree with all the above, just ask RusselB.generdawg wrote:Ala the McInroe factor.T1 Terry wrote:...the keyboard punch ups that get the crowds in.
I wondered about that too Steve, but Leslie says;SteveW wrote:...is it possible that the area behind the fridge was meant to be insulation free in order to avoid heat build up from the fridge heat exchanger?
So I'm thinking the board is stopping external heat from getting in, but sans photos, I can only visualise the textual narrative.Swisslulu wrote:Bruce has put some ply between the vents which has reduced the internal temp.
Does the fridge have one of those condenser/dust collectors on the back Kay? If yes, a suggested mod while the fridge is out. Glue a piece of foam thick enough to press up against the condensor when the fridge is in place, far enough above the bottom vent to contact the lower section of the condenser.