Measure wattage

Discussion about any electrical topic except 240 volts. Solar, converters, inverters, lights, battery chargers, etc
Mrcoolabah1au
Posts: 2699
Joined: Wed Jan 23, 2013 3:36 pm
Location: Tocumwal on the Murray river

Re: Measure wattage

Post by Mrcoolabah1au »

Do want my clamp meeter bruce bought it just in case not using ok
Coolabah1au
Wayne nini
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Measure wattage

Post by BruceS »

Hi Wayne,
no, thankyou very much for the thought though.
Will wait for Peter to see if he gets a reading from his testing tonight.
I have a feeling it uses about the same as one little LED on an indicator light on the front of a TV!! (almost nothing)
*******************
BruceS
Mannum, SA

********************
oldtrack123
Posts: 192
Joined: Mon Dec 03, 2012 9:11 pm

Re: Measure wattage

Post by oldtrack123 »

BruceS wrote:Hi Wayne,
no, thankyou very much for the thought though.
Will wait for Peter to see if he gets a reading from his testing tonight.
I have a feeling it uses about the same as one little LED on an indicator light on the front of a TV!! (almost nothing)
HI Bruce
Should get TWO for Terry,
So he can properly do his comparison tests. Using Watts! ;) :)

PeterQ
2foot6

Re: Measure wattage

Post by 2foot6 »

I have checked the top hat screamer,my meter is being tempermental,could not measure current,but resistance is 7000 ohms(in the off state)The top hat should draw approx 20 M/amps or there abouts when operating.cheers Peter. .................................................No responsibility taken for calculations,if you get a flat battery,sorry get out and push... :D :D
2foot6

Re: Measure wattage

Post by 2foot6 »

I stand corrected,just found the specs for the screamer @ 12v DC,105 dbm it draws 110 MA.It may be a bit loud for a high and low battery alarm, :evil: there are smaller less noisy electronic buzzers available :) (just a thought)cheers Peter.
User avatar
T1 Terry
Posts: 15965
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Measure wattage

Post by T1 Terry »

The alarm driver can handle 500mA (not sure watt that is in Ah) so it will be able to drive the screamer direct, perhaps in a sound proof box? Maybe you could put that terrible noise that could be heard in the boat moving video clip in the same box ad they could annoy each other ;) :lol:
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
2foot6

Re: Measure wattage

Post by 2foot6 »

To soften the noise of the screamer wrap some duct or electrical tape over the gaps at the top of the case .cheers Peter
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Measure wattage

Post by BruceS »

Thankyou everyone for the info.
I have a couple of real decent chaps with lovely wives (or girl friends?) who watch the boat when we're not onboard.
We all watch out for each other in case of broken ropes, drowned dinghy's etc etc.
Maybe I could rig up an emergency "PULL THIS CORD IF THE ALARM RINGS" ?? (joke) ;) ;)
Just hope the Police don't come running as they're only a km away!!
These suckers are so loud!
*******************
BruceS
Mannum, SA

********************
User avatar
TassyJim
Posts: 97
Joined: Wed Dec 05, 2012 7:18 am
Location: Stowport NW Tassy

Re: Measure wattage

Post by TassyJim »

Here is a similar unit which is rated at 200mA
http://www.ebay.com.au/itm/Siren-Alarm- ... 1232720369

I would hope that your alarm system shuts it off well before the battery goes flat.

Jim
Jim & Jennene with Teddy & Pascale. RIP Scarlet
Used to have Iveco towing a 5th Wheeler
Now back to dreaming again...
Nomad's Almanac
http://www.c-com.com.au/nomad.htm
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Measure wattage

Post by BruceS »

That's the same one we're talking about Jim except yours is double the price!!
Noisy little suckers! Be good for interrogation techniques .........
*******************
BruceS
Mannum, SA

********************

Return to “Low Voltage Electrical”