Digitising Photo Slides

Drop in and dribble on about nothing serious. Seriously a mad place to hang out. Better to avoid it if you're not in the mood!!! If you're determined to be sad, bad, mad & angry then move along!!!
Eddy
Posts: 175
Joined: Sat Aug 17, 2013 11:12 am
Location: Perth
Has thanked: 1 time
Been thanked: 1 time

Digitising Photo Slides

Post by Eddy »

Hi
I guess a few of us would have slides hanging around
Has anyone converted their slides to a digital format ?
I am going to be selective in the ones I convert so won't be hundreds of them
I have been thinking of using the scanners that Harvey/Office Works sell for around $100
Has anyone done this and can offer a suggestion
Eddy
User avatar
SteveW
Posts: 2343
Joined: Sun Dec 09, 2012 9:03 pm
Location: Glenelg, South Australia

Re: Digitising Photo Slides

Post by SteveW »

I have done my slides - as well as almost every other photo right back to the brownie box camera. I used a flatbed scanner, albeit one that had proper slide holders and appropriate software. I don't think it matters what scanner you use as long as it has the software to do the job. Obviously a dedicated photo scanner will have it. The flatbed had the ability to scan from both mounted slides and slide negative strips. The software divided the slides into individual photos after scanning five at the one time. Sadly, some of the slides have deteriorated in quality with the passage of time.

Ever wondered how the brownie box camera got its name?
Steve Williams
http://stevew1945blog.com/

Every absurdity has a champion to defend it.
Oliver Goldsmith. 1728 -1774
Eddy
Posts: 175
Joined: Sat Aug 17, 2013 11:12 am
Location: Perth
Has thanked: 1 time
Been thanked: 1 time

Re: Digitising Photo Slides

Post by Eddy »

Thanks for the reply Steve - I had a quick look at the flatbed scanners but I don't think you get too much change from 600 odd dollars.
I think I will go through the slides , pick the best and see how much the shops will charge and that will determine if I should buy a scanner or not
What system did you use to name the scanned photos
How did the box brownie get it's name ?
Eddy
User avatar
Dot
Posts: 24722
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: Digitising Photo Slides

Post by Dot »

Eddy have you sussed out the ? photo places that do all these types of transfers?
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
User avatar
SteveW
Posts: 2343
Joined: Sun Dec 09, 2012 9:03 pm
Location: Glenelg, South Australia

Re: Digitising Photo Slides

Post by SteveW »

No need to go for an expensive flat bed scanner. One of the cheaper Multi Function Printer, Copier. Scanners will do the job. Or one of the cheaper dedicated slide scanners. Expensive scanners are ok for high quality reproductions of high quality prints. Nothing will reproduce high quality from your slides - a cheap scanner will do as well as an expensive one. But you will get OK copies.

As for sorting, it's difficult but you have to make some decisions. Some I did by the year, e.g., Our Family 1970. Some I did by relating to events. It's hard and in some cases I have more than one copy, but in different folders. I did thousands of photos.
Steve Williams
http://stevew1945blog.com/

Every absurdity has a champion to defend it.
Oliver Goldsmith. 1728 -1774
User avatar
BruceS
Site Admin
Posts: 9305
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Digitising Photo Slides

Post by BruceS »

Don't chuck all them slides out Eddy.
I have a scanner that can do slides but at the moment I just don't have much spare time.
Once I catch up with a few jobs I'll get it all setup and post back on the forum.
The one I have turns on a light ABOVE the slide & then scans rather than a normal scanner that lights up from below.
Some time ago I did several hundred for the local museum.
A lot of the old slides had deteriorated badly and were not worth scanning.
I also converted a lot of VHS videos over to digital. (DVD)
*******************
BruceS
Mannum, SA

********************
Eddy
Posts: 175
Joined: Sat Aug 17, 2013 11:12 am
Location: Perth
Has thanked: 1 time
Been thanked: 1 time

Re: Digitising Photo Slides

Post by Eddy »

Dot - There is a crowd in Perth who do them, have to give them a ring once I sort out a few things, I feel the advantages of doing them yourself is that you can categorise them at the same time

BruceS - Your a bit ahead of me in the conversions to digital, I have some silent super 8mm movie that have been sitting in the must do one day category !!!!!

Thanks Eddy
Shirley
Posts: 4556
Joined: Sat Dec 29, 2012 4:06 pm
Location: Lake Macquarie. NSW.
Has thanked: 16 times
Been thanked: 26 times

Re: Digitising Photo Slides

Post by Shirley »

I tried to have a 8mm movie of my 21st party done but the folk said to deteriorated to bother trying to do.
Shirley & Bruce.
User avatar
Newcastle George
Posts: 3285
Joined: Wed Dec 05, 2012 3:21 pm
Location: Kotara, Newcastle
Has thanked: 2 times
Been thanked: 8 times

Re: Digitising Photo Slides

Post by Newcastle George »

Here are a couple that I have converted using an Aldi gadget. From slides which were taken some 35 years ago

George
20131102112233_01 (Custom).jpg
20131102112448_01 (Custom).jpg
You do not have the required permissions to view the files attached to this post.
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
BernieQ2
Posts: 8259
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Digitising Photo Slides

Post by BernieQ2 »

Did you take those photos George?
Bernie.

Return to “Drop in & Chat”