Diff Change

Advice and help involving any mechanical issues.
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Diff Change

Post by Kappy »

This may seem a little premature only having purchased my rig the other day and still haven'y taken possession.

But just curious I believe my rig has as the current owner puts it a "slow diff", even though it didn't feel that way on the freeway.

However should i wish to change to a highway diff, can members advise me how difficult a process it may be.

Rig is a 91 Mercedes Ex school bus,OH 1418 single axle, with a Volgren body. i was sitting on by the speedo at around 95-97 km/h and felt there was more.

Anyway just curious.

Thanks in advance.

Cheers
Kappy
Last edited by Kappy on Wed Mar 09, 2016 10:40 pm, edited 1 time in total.
Cheers

Kappy

Growing older is inevitable, growing up is optional.
User avatar
T1 Terry
Posts: 15963
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Diff Change

Post by T1 Terry »

The taller the diff ratio, the further the gaps between the gears, so keep the ratio as low as practical. There really isn't a fuel saving above a certain point, if you already back off before the engine reaches the governors then I doubt a taller diff would help much, but if it's screaming for mercy and you still think you could walk faster then a diff change could be a serious consideration.
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Diff Change

Post by BruceS »

If it was going over 56mph then it does have the highway diff already.
I'm not familiar with that bus set up but from memory it is rear engine. Does it have any tailshaft at all or is it 'close-coupled'?
I totally agree with Terry on this one. A lot of bus conversions are happy to sit on a steady speed like 85-90. Less rattles, broken plates & testicles tangled around kidneys!!!
*******************
BruceS
Mannum, SA

********************
User avatar
mikeg
Posts: 124
Joined: Wed Dec 05, 2012 2:53 pm

Re: Diff Change

Post by mikeg »

Kappy, is it front, mid or rear engined?
User avatar
Dot
Posts: 24720
Joined: Fri Nov 23, 2012 6:12 pm
Location: Strathalbyn SA
Been thanked: 37 times

Re: Diff Change

Post by Dot »

So does that mean our bus has a highway diff because I haven't felt my testicles anywhere near the kidneys :? :?
Queen of the Banal & OT chatter and proud of it. If it offends you then tough titty titty bang bang.
User avatar
Wilbor
Posts: 795
Joined: Wed Dec 05, 2012 1:58 pm
Location: Ingham NQ

Re: Diff Change

Post by Wilbor »

You're not feeling them properly then Dot, you need more practice :D
Rob
Swagman
WILBOR-TOO
Why I Like Being On Road - Too
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Re: Diff Change

Post by Kappy »

Thanks guys for the input.

Rear engine and I haven't had real close look at the coupling, every thing just looked clean underneath.

As I said the speedo show 97 and about 2100rpm, but the owner said his GPS was 90, anyway all was smooth and cruisy so maybe 90 is cool.

I get the mobile home mindset is different to petrol head mindset,I'm sure I'll adapt.

Probably just fishen when I get her home I'll have a good look. Just a tad impatient and excited. lol

Cheers
Kappy
Cheers

Kappy

Growing older is inevitable, growing up is optional.
User avatar
supersparky
Posts: 8784
Joined: Mon Nov 26, 2012 7:00 pm
Location: Home on the beautiful Gold Coast for a while.
Has thanked: 81 times
Been thanked: 66 times

Re: Diff Change

Post by supersparky »

You will know whether it needs a bigger diff or not by the time you drive it home. That is, assuming you will be doing some highway miles. After about 85kmh all you are achieving is excessive fuel consumption.
And you are right, it does take a while to de-petrol head yourself.
Cheers
David

David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Re: Diff Change

Post by Kappy »

Yes the run home is about 200 odd k's of highway running with up hill and down dale and flat bits.

I have already found it moves nicely through the gears.

For the petrol head boost I'll run the Hog.

Cheers
Cheers

Kappy

Growing older is inevitable, growing up is optional.
User avatar
jon_d
Posts: 4675
Joined: Thu Apr 11, 2013 6:37 pm
Location: bedford
Has thanked: 42 times
Been thanked: 36 times

Re: Diff Change

Post by jon_d »

2100 at 90 is a good place.... good torque, probably the best for fuel consumption. 100 will be about 2500

Return to “Mechanical ... Nuts & Bolts”