Mercedes OH 1418

Advice and help involving any mechanical issues.
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Mercedes OH 1418

Post by Kappy »

I've owned my rig since mid March, however I have discovered a general lack of information regarding older buses.

All I know is I have a 1991 Mercedes OH1418 with a Volgren aluminium body.

Even contact with with Mercedes Aust hasn't revealed a whole, I got more info from Volgren in that the frame and panel are all tensile Aluminium.
.
I know the 14 18 stands for 14 tonne and 180 hp ( turbo diesel)

The rig has a slow diff with a top speed of 91km/h, (GPS) and drives well at that speed, even pulls OK up hills, I get the not in a hurry anyway.

So I was hoping for some guidance on what type and quantities of oils to use and any other info that members may be able to provide. or point me in the general direction.

I don't even know the size of the engine (litres) only that it is a straight 6 cylinder turbo diesel.

Cheers
Kappy
Cheers

Kappy

Growing older is inevitable, growing up is optional.
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Mercedes OH 1418

Post by BruceS »

Pretty sure it's the same motor that was in the 1418 truck.
Think it was the OM352 engine.
Apparently in Germany it was released with a turbo & in some cases, also an intercooler.
It was decided it was too hot to include those 'add-ons' for the Australian market.
Mine used to always run hot on a very hot day.... there was nothing I could do to cool it down.
The motors are a VERY low tolerance motor and you can bet your bottom dollar that if you get it just a few degrees over temperature that it will nip a piston. Let it cool down & away you go but from then on it will use 4-5 litres of oil for every 500miles.
Brilliant low rev torque though.......... wait till your revs drop right down before changing down. Most times it'll drop to 1300 & just grunt & hang on...........
Can you read the engine number on the block?
Does it have the high beam switch on the stalk just under the steering wheel? Common failure..... I changed mine to foot operated switch like in the 50's.
*******************
BruceS
Mannum, SA

********************
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Re: Mercedes OH 1418

Post by Kappy »

Thanks Bruse,

Not sure if it the same engine I picked her up on a 38C day and drove through hills of Dwelling up area and the temp seemed OK around 80 to 90 C tops.

I've done about 500k in her and the oil level hasn't changed ,just wanted to change it before I head to Hedland in June.

The engine number is 37695260050810, I recall and earlier comment about separate heads for each cylinder, this engine has a normal head.

The high beam is on the indicator stalk.
Cheers

Kappy

Growing older is inevitable, growing up is optional.
User avatar
BruceS
Site Admin
Posts: 9304
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Mercedes OH 1418

Post by BruceS »

OK, different motor then. I thought the year was just after those other models stopped. About 1977 or so I think then they went to the V engines.
Load may not effect it in a bus anyway..... I was pulling a tri.... loaded up most times too.
Did you ask on the Aus Bus forum?
Are you positive it's one head? One tappet cover... yes but separate heads?
The 1419 model truck had a single head though.. also went 2km/hr faster & I could never catch him. Slimline cab though so I slept more comfy!
*******************
BruceS
Mannum, SA

********************
BernieQ2
Posts: 8257
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Mercedes OH 1418

Post by BernieQ2 »

Google is your friend .
Bernie .
User avatar
Kappy
Posts: 410
Joined: Mon Feb 29, 2016 11:24 am
Location: Wagin WA

Re: Mercedes OH 1418

Post by Kappy »

Google has been quite uncooperative.
Cheers

Kappy

Growing older is inevitable, growing up is optional.
BernieQ2
Posts: 8257
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Mercedes OH 1418

Post by BernieQ2 »

Mercedes OH 1418 put that on google
Bernie .
BernieQ2
Posts: 8257
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Mercedes OH 1418

Post by BernieQ2 »

Just looked my self some times theres a group of like minded people .
Bernie .
User avatar
T1 Terry
Posts: 15963
Joined: Fri Nov 23, 2012 3:44 pm
Location: Mannum South Australia by the beautiful Murray River
Has thanked: 50 times
Been thanked: 30 times

Re: Mercedes OH 1418

Post by T1 Terry »

Couldn't be the old 1418 engine Bruce as Kappy mentioned that it meant 14 tonne and 180hp..... the older motor it meant 14km/h up hill and 18km/h down the other side :lol: The deluxe early model had a clock where a normal truck had the speedo, the standard model had a tear off page calendar ;)
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
User avatar
jon_d
Posts: 4675
Joined: Thu Apr 11, 2013 6:37 pm
Location: bedford
Has thanked: 42 times
Been thanked: 36 times

Re: Mercedes OH 1418

Post by jon_d »

Kappy,

I have a full set of Bedford manuals if that helps.


http%3A%2F%2Fwww.mercedes-benz.com.au%2Fcontent%2Fmedia_library%2Faustralia%2Fmpc_australia%2Frep_busesng%2Frep_service_parts%2Fbuscentral%2Fbuscentral_pdf.object-Single-MEDIA.download.tmp%2FBusCentral14_Winter_2013.pdf&usg=AFQjCNExypviPxCw1Q5cUnysUiKdlc8wZw&sig2=pcuBgu5q8qwUhtJ-3Wtvlg


https://www.google.com.au/url?sa=t&rct= ... ijmPf32ZJA


this one could be the go;
https://www.tradebit.com/filedetail.php ... op-repair-



you might need to drop this into google translate to get the real details.

http://www.ebay.de/itm/Mercedes-Benz-LP ... SwIUNXFkMn


http://www.ebay.de/itm/Orginal-Mercedes ... FmFsHGuvQg

http://www.ebay.de/itm/LKW-MERCEDES-L-L ... SwnipWZ-o-

http://www.ebay.de/itm/Werkstatthandbuc ... xycmBS08up


http://www.ebay.de/itm/Werkstatthandbuc ... xycmBS08up

Return to “Mechanical ... Nuts & Bolts”