inverter fridges

[T1 Terry]

Either Selleys Armourflex or Sika 11FC will do the job fine, I think we used timber for the bottom mount so it was easy to cut out bits to locate the feet and flexible enough to remove the vibration and rough bumps and that helps heaps with fridge noise at night ringing through the body work. A thick layer of Armourflex/Sika between the fridge body and aluminium angle will help with noise transfer as well as vibration reduction .... and give you some where to cut through the stuff if you ever need to remove it, a sharp blade on a multi tool is the go for that job.

T1 Terry

[dcsingos]

Thanks, sounds like a good idea I have some Sikaflex 11FC so will look at making up a wooden base board, will be easier and no duck shit welding either LOL. Won't know what to do until end of month as we are going away on the 21st and I have a garden make over to do for a client before we go so the fridge will have to wait until we get back when I don't have to rush and stuff something LOL.

[T1 Terry]

Thanks, sounds like a good idea I have some Sikaflex 11FC so will look at making up a wooden base board, will be easier and no duck shit welding either LOL. Won't know what to do until end of month as we are going away on the 21st and I have a garden make over to do for a client before we go so the fridge will have to wait until we get back when I don't have to rush and stuff something LOL.

We have something like that happening at our place ... sort of, the sun comes over and makes the garden as well as the lawn look dead

[supersparky]

........................
We have something like that happening at our place ... sort of, the sun comes over and makes the garden as well as the lawn look dead

The same thing happens at our place too.