For Terry
-
BruceS
- Site Admin
- Posts: 9304
- Joined: Thu Nov 22, 2012 7:32 pm
- Location: Mannum, SA, 5238
- Has thanked: 36 times
- Been thanked: 36 times
Re: For Terry
Time to get the marshmellows out Wayne!!! You're wasting all those watts!!!
Something dead shorting there somewhere?
Something dead shorting there somewhere?
*******************
BruceS
Mannum, SA
********************
BruceS
Mannum, SA
********************
-
T1 Terry
- Posts: 15965
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 50 times
- Been thanked: 30 times
Re: For Terry
Wow, Is this on your set up off the interweb? I'd go with a very bad connection and a lot of current running through that joint.. The cable will be stuffed a fair way up from that crimp lug, so a whole new cable will probably be required, and the joint surface cleaned up with one of those scotch brite type buffer pads on a drill and Alminox added.
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
Mrcoolabah1au
- Posts: 2699
- Joined: Wed Jan 23, 2013 3:36 pm
- Location: Tocumwal on the Murray river
-
Greynomad
- Posts: 9025
- Joined: Tue Dec 04, 2012 4:16 pm
- Location: Rutherglen, Vic.
- Has thanked: 28 times
- Been thanked: 61 times
Re: For Terry
Muihtil? 
Regards & God bless,
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
Ray
--
"Insufficient data for a meaningful answer."
Isaac Asimov, "The Last Question"
"I refuse to drink water, because of the disgusting things fish do in it"
W.C.Fields
-
supersparky
- Posts: 8785
- Joined: Mon Nov 26, 2012 7:00 pm
- Location: Home on the beautiful Gold Coast for a while.
- Has thanked: 81 times
- Been thanked: 66 times
Re: For Terry
Wayne, Did you work out what made that nut and bolt look like they were pieces of coloured plastic??
Cheers
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
-
T1 Terry
- Posts: 15965
- Joined: Fri Nov 23, 2012 3:44 pm
- Location: Mannum South Australia by the beautiful Murray River
- Has thanked: 50 times
- Been thanked: 30 times
Re: For Terry
So, why didn't the fuse blow? No fuse or a 6" nail used to stop the things from keep blowing
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
-
Mrcoolabah1au
- Posts: 2699
- Joined: Wed Jan 23, 2013 3:36 pm
- Location: Tocumwal on the Murray river
Re: For Terry
Good question maybe I will have to ask a good technician or some one who really knows what the problem is 
Coolabah1au
Wayne nini
Wayne nini
-
2foot6
Re: For Terry
If the fuse didn't blow,the problem may have been loose nut and bolt,causing heat when under a heavy load.
-
supersparky
- Posts: 8785
- Joined: Mon Nov 26, 2012 7:00 pm
- Location: Home on the beautiful Gold Coast for a while.
- Has thanked: 81 times
- Been thanked: 66 times
Re: For Terry
Having another look at that pic I would be saying "fuse?? what fuse??'
Cheers
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.
David
David and Terrie
2006 Winnebago Alpine
Not all who wander are lost.