Thanks Jon , and Bruce . I was trying to stop the smell coming out like a reverse S bend which stops the smell coming back into the bus .
Might try a made up sorta s bend with the 10mm pipe with some water in it I think ??? maybe it will still burp when needed too as apposed to the smell there all the time .
Bernie .
Grey water smell .
-
- Posts: 795
- Joined: Wed Dec 05, 2012 1:58 pm
- Location: Ingham NQ
Re: Grey water smell .
Bernie, I had a similar problem with Wilbor (1), the grey water tank was under the stairs and the breather right there. I put about 4m of clear hose onto the breather pipe and ran it to the back, never had that smell problem again 

Rob
Swagman
WILBOR-TOO
Why I Like Being On Road - Too
Swagman
WILBOR-TOO
Why I Like Being On Road - Too
Re: Grey water smell .
Good idea Rob but its at the back now . problem only turned up because of the sun one day it was the only shade (at the back) so we were near the smell .
Bernie .
Bernie .
-
- Posts: 3284
- Joined: Wed Dec 05, 2012 3:21 pm
- Location: Kotara, Newcastle
- Has thanked: 2 times
- Been thanked: 8 times
Re: Grey water smell .
Bernie,
If you connect a Hepvo valve to the breather, the membrane will remain closed, eliminating the smell, until it needs to burp.
George
If you connect a Hepvo valve to the breather, the membrane will remain closed, eliminating the smell, until it needs to burp.
George
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
-
- Posts: 3284
- Joined: Wed Dec 05, 2012 3:21 pm
- Location: Kotara, Newcastle
- Has thanked: 2 times
- Been thanked: 8 times
Re: Grey water smell .
Home now Bernie.
George

George
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor