fixed a leaky join (I hope its fixed) on the roof. Soudal T'Rex - bloody amazing stuff, $12.50 a tube.
cleaned the roof as well, covered in lichen. Gettin' too old for that sort of work @ 4.3m off the deck
Jerry machined the universal water pump bearing, I did my bestest MacGyver doggie job with an O ring inside the ceramic part that goes against the impeller and filled up with goop and another one around the seal that goes into the body and filled that up with goop.... the O ring is to hold then centre while the goop dries, bolted it all back on and it works a treat happy chappy is I
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
dapope wrote:Fingers crossed you never need to do it again!
Not near as bad a job as it looked once an off the shelf parts solution was found. The goop I used is the stuff we attach to solar panels with and the stuff I made the temporary seal to get the truck back from Lake Illawarra because I couldn't find a replacement pump. I guess time will tell, but it looks promising at the moment
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves
Winch is fitted and works, made a container jacking thingo, guides and rollers are made to help put the container on, Kombi is loaded on the truck and tied down, truck is out the front and ready to roll..... and only 12hr behind schedule, must be a record or something
Guess I won't be posting much for the next 2 weeks, gunna be rather busy me thinks
A person may fail many times, they only become a failure when they blame someone else John Burrows
Those who struggle to become a leader, rarely know a clear direction forward for anyone but themselves