Good morning daily

[T1 Terry]

Did a bit more cement mixing in the barrow on Saturday, 2 x 70kg loads, knacked after that and didn't get up until 12 pm yesterday Did more brick moving yesterday to try and make a better path to drive the truck on so I can get up the side of the garage ..... I was going to do more cement mixing but the body said that wasn't gunna happen. If I do decide to concrete the pad beside the garage, I reckon I'll get ready mixed, the body just would hold up mixing that much in a barrow and I doubt shovelling that much into a cement mixer might even be a tall order the way my body is fairing lately
Have to wait for a lift pump for the truck and in tank pump for the Ford to arrive from evilbay to get those two mobile and out of the workshop yard, and for the demo mob to lift the roof off where Margaret's desk once was to see if the Jimny keys are there so I can unlock the steering.
Transported the silver Prius and the blade home as well as the T1 Lithium trailer that is full of Brian stuff that we need him to sort through, loaded before the flood and still waiting .... Brian

T1 Terry

[Dot]

Home, 6 loads of washing all done and put away, grey water tank emptied and flushed out, bog all emptied and also flushed, fridge and freezer also washed out. Totally buggered. The wind and sun did a great job or drying and airing out the washing and the bus. Must do this again soon

[RobertNotBob]

Welcome home.

[BernieQ2]

Good morning everyone.
Yesterday while Carol was out with her mates at Bingo, I started the bracing on the shed so far one side complete, next the other side then the roof. But not today.
We are off to Hervey Bay today to catch up with our southern friends, then a quick trip to Bunnings for more metal strapping and those tensioner thingy's for the strapping.
Birds still feeding babies...they have got used to me being there and pay no attention.
Even the bronze wing doves who also have a nest in the next door tree seem to think I'm ok being there.
Carol had a win
But not me
Keep safe.
Bernie.

[supersparky]

Good morning everyone. Its going to be about 30° here today with a light breeze, again. Great weather. We had a ride in a chopper yesty. Went into Mitchell Falls. Stunning scenery, but I can't get those pics off my camera yet.
Had a swim, then looked at a few different rock art sites.
Watched the reef sharks chasing all the little fish that hang around the back of the boat last night. I can't add pics, sorry Dot. Maybe when we get to Broome.
Safe travels everybody.

[jon_d]

Morning all.

Looks like a nice day here today. I'll be under the bus undoing all the nuts and bolts. All most disconnected.

Dave, wondering if the 'clinking of China plates' is not a bearing but a gear/synco that is slipping on a shaft and chattering??? Either way, it's going to be disassembled.

[Eddy]

We had a ride in a chopper yesty. Went into Mitchell Falls. Stunning scenery,

That was our first ever chopper flight- had no doors only held in by seatbelts. We had hiked up to falls then helicoptered down - very scenic. We’re in Broome for another two nights - won’t need your winter pyjamas here either
Enjoy your trip

[supersparky]

Jon, maybe it is. You'll tell me in a few days.
Eddy, I reckon we went in the same chopper. No doors, and don't let these tail of the seatbelt get caught in the rotor blast. It hurts a bit while flapping about.

[Dot]

morning everyone, sunny and blue skies at the mo, had a good down pour through the night. Got my yearly notice for my heavy vehicle, licence medical, get that next week with usual GP visit. Off outside now, may mow ?? Looking forward to the pics David. Take care doing the g/box jd

[BernieQ2]

Morning Folks.
We had a great day with our Victorian friends down the "Bay" It was a good catchup
Done a quick trip to the new Bunnings spent a montza then home by 5pm.
Will at some time today start back on the shed.
Not much to say, Jon's playing with his shaft...that has me confused
Keep safe everyone.
Bernie.