Good morning daily

[jon_d]

Terry, have you tried using a roller with that paint? That might not work with the stuff you've already thinned down, but it should work OK with the other stuff.

Are you a painter Dave?

[T1 Terry]

Terry, have you tried using a roller with that paint? That might not work with the stuff you've already thinned down, but it should work OK with the other stuff.

Are you a painter Dave?

Never question a job Dave may have done at sometime in his career ...... working for an insurance company was one I didn't have on my Bingo sheet, so "protective coating technician" and "decorative application artist" are far more likely to be there than insurance backroom worker ......

T1 Terry

[T1 Terry]

Terry, have you tried using a roller with that paint? That might not work with the stuff you've already thinned down, but it should work OK with the other stuff.

I doubt they make a roller for the profile surface of these two containers, what every they were carrying previously has made a serious attempt on escaping ..... I doubt there is an actually grading level for these containers, the second level on this site sort of boarders on the edges https://containertraders.com.au/grades/ ... kAQAvD_BwE
every defect, plus a few, are present on these containers .... it will probably require skilful spray application to get some of surfaces completely covered ......

Let's just say, if I had gone personally to view these containers before purchase, it would nave been a "yeah nah" let's look at something else I'm definitely getting too old for this sort of crap, I'm completely missing the potential traps ..... but too late now, I've paid for them, they are on site, so now I have to deal with the hand I've been dealt ....

T1 Terry