Bernie and Carols Isuzu fit out.

Please feel free to describe your motorhome, campervan or caravan. (make, model, length etc)
User avatar
BruceS
Site Admin
Posts: 9305
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Bernie and Carols Isuzu fit out.

Post by BruceS »

Don't think you'll be going anywhere this week Bernie!! :twisted: :evil:
I wonder if it might pay to have a separate air cleaner for the compressor air inlet to reduce the suction PSI? (vacuum)
Something like on a normal workshop air compressor. As long as it can be installed up a bit higher out of the road dust swirling around.
On the other hand if the rings don't get some oil ...................
Are they just splash fed or engine oil pressure to the main bearing. ??
*******************
BruceS
Mannum, SA

********************
BernieQ2
Posts: 8258
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Bernie and Carols Isuzu fit out.

Post by BernieQ2 »

Pressure Bruce , that hole on the bottom of the Compressor is the oil pressure inlet you asked me about it a while ago I didn't think it was at the time.
Bernie
User avatar
SteveW
Posts: 2343
Joined: Sun Dec 09, 2012 9:03 pm
Location: Glenelg, South Australia

Re: Bernie and Carols Isuzu fit out.

Post by SteveW »

Does this help?
DSCF2780 (Custom).JPG
You do not have the required permissions to view the files attached to this post.
Steve Williams
http://stevew1945blog.com/

Every absurdity has a champion to defend it.
Oliver Goldsmith. 1728 -1774
BernieQ2
Posts: 8258
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Bernie and Carols Isuzu fit out.

Post by BernieQ2 »

Thanks Steve...better.
Bernie
User avatar
BruceS
Site Admin
Posts: 9305
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Bernie and Carols Isuzu fit out.

Post by BruceS »

Obviously lots of experience in the CIB branch Steve? ;) ;)
It's called fabrication!!!
Better see if you can fix up my Facebook image? !! :evil: :twisted:
Sometimes I just gotta laugh at some shops security cameras! Not sure exactly how a perp can be identified.
*******************
BruceS
Mannum, SA

********************
BernieQ2
Posts: 8258
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Bernie and Carols Isuzu fit out.

Post by BernieQ2 »

!!!!!!!!!! SHAZAM !!!!!!!!!!!
What a lot of FFFFFFFFFFnfun that was. They was a sneaky little oil line I missed this day but its out .Took a bit to spot it .
Yesterday removed the pump gear with the help of a twin puller only two hole in the gear wheel , when it let go it frightened the bejesus out of me hit my glass's then landed on my knee...I survived .
Todays pic's .
Bernie .

Nearly forgot there is about a 1/8th" movement on the compressor pump shaft up and down . Good thing I didn't just do a top end fix..
DSCF2783 (Custom).JPG
DSCF2785 (Custom).JPG
DSCF2784 (Custom).JPG
You do not have the required permissions to view the files attached to this post.
User avatar
Newcastle George
Posts: 3285
Joined: Wed Dec 05, 2012 3:21 pm
Location: Kotara, Newcastle
Has thanked: 2 times
Been thanked: 8 times

Re: Bernie and Carols Isuzu fit out.

Post by Newcastle George »

Bernie, I think I can see the screw for adjusting the fuel in pic 1, beneath the yellow dot.

George
George, Julie, Leonie & Sean - Kotara, Newcastle
DIY 11.5M 1979 Bedford, Nissan/UD FE6T motor
BernieQ2
Posts: 8258
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Bernie and Carols Isuzu fit out.

Post by BernieQ2 »

You could be on the money George , I have removed the plastic cover and its a adjustable bolt/screw .
Bernie .
DSCF2786 (Custom).JPG
You do not have the required permissions to view the files attached to this post.
BernieQ2
Posts: 8258
Joined: Thu May 07, 2020 7:57 pm
Has thanked: 13 times
Been thanked: 25 times

Re: Bernie and Carols Isuzu fit out.

Post by BernieQ2 »

Cant seem to send this on the other web site Bruce so its here .
And in my hand as requested .
Bernie .
DSCF2788 (Custom).JPG
You do not have the required permissions to view the files attached to this post.
User avatar
BruceS
Site Admin
Posts: 9305
Joined: Thu Nov 22, 2012 7:32 pm
Location: Mannum, SA, 5238
Has thanked: 36 times
Been thanked: 36 times

Re: Bernie and Carols Isuzu fit out.

Post by BruceS »

Looks good Bernie. You'll have to try to install it in an easy to get to place so you can watch the level & empty it without mess when needed. Might need hose that is oil resistant and won't suck flat when it gets warm.
How did you get those finger nails so clean? Gloves when on the job?
*******************
BruceS
Mannum, SA

********************

Return to “About your outfit”